Window AC / June 6, 2018 / Babette Arsenault.
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Another huge improvement in window air conditioners is in their appearance. Older models did not blend in very well with their surroundings. They were usually some shade of brown and looked like there was a box in your window. Window air conditioners today are much less obtrusive and look less like boxes. Corners are rounded and colors are much lighter. This gives them a much sleeker look. As with most things once they have been around for awhile cost become more reasonable and less of an obstacle. A window air conditioner can be purchase for less than two hundred dollars and often not much more than one hundred dollars. Of course this is for smaller units. Costs go up as the cooling capacity of the unit increases.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.