Window AC / September 18, 2018 / Jacqueline Bizier
If the room is shaded then you can decrease the BTU rating you calculated with the climate control unit calculator by 10 percent however if you wish to cool a kitchen youll need to raise the rating by 4000 BTUs. When the room you are cooling is used by two or more people add six hundred BTUs per person to the rating necessary to cool the room. Before you buy the first air conditioner that fits the BTU rating necessary to cool your room make sure you have a window that will be suitable for the unit. Measure windows in the room (make sure not to block fire escapes) and make sure to buy a window air conditioner that will fit into the opening.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Equipped with remote control and electronic thermostat this is a very comfortable machine to operate and should handle bigger jobs perfectly. It is just another example of a highly rated GE window air conditioner. With so much competition in the manufacture and sale of conditioners there are certain models (we are not talking about cheap foreign manufactured models) which cost just a few hundred dollars. However better models cost more and provide better service. Even if you are aware of your requirement from an air conditioner there is always a dilemma as to which type of conditioner should a person choose.