Window AC / September 14, 2018 / Aubrette Dumoulin.
The main aspect in the choice of window air conditioner is its cool air performance. You can approximate the required power at the rate of 1 kW per 10 sq.m. with a ceiling height of 2.8 - 3 meters; for household models the characteristic is: from 1.5 - 2 to 6.5 - 8.5 kW. If there is a large glass area in the room windows face south or there are other additional heat inputs one should better buy a model with a power reserve of 15-20%. Another important factor in choosing window air conditioner is room functionality. For example air conditioner installed in the kitchen must be of high performance to provide optimal heat control. Air conditioning unit for bedrooms should have low noise characteristics.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
To ensure efficiency use weatherstripping or calk to seal any gaps between the unit and the window frame. Once youve finished installing your cooling appliance youre ready to sit back relax and enjoy your home again. Air conditioning can help you sleep better and enjoy your house more fully in the Summer months. If you would like to cool your entire house contact an HVAC technician about installing a central cooling unit but until then the window unit will help your family stay cool. What one sees of a window air conditioner from the outside is the sleeve a metal box with ventilation louvers that houses the actual air conditioner.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.