Window AC / September 14, 2018 / Aubrette Dumoulin
They are also easy to install unlike split air systems and central ac. Installing a window unit is an easy DIY job that can be tackled in an hour or so. Also because they are installed in a semi-permanent fashion you just set it and forget it. Unlike portable ac units which are often wheeled around from room to room a window unit is designed to stay put. In spite of all of these benefits however window units have one major drawback: the noise. These units are loud and different models can range from being moderately annoying to downright deafening.
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.