Window AC / September 14, 2018 / Aubrette Dumoulin
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
How much depends on each situation. When considering your options for air conditioning installation you need to get prices for everything and then decide what type of unit will work the best for you. In another article I will talk about when to consider using a ductless split type air conditioning unit. They are also another possibility to consider. Window air conditioners are small units made to fit a standard window space. They work like any other air conditioner and they come in different BTU (British Thermal Units) capacities to cool rooms of different sizes.
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.