Window AC / August 27, 2018 / Francoise Salmons
They are also easy to install unlike split air systems and central ac. Installing a window unit is an easy DIY job that can be tackled in an hour or so. Also because they are installed in a semi-permanent fashion you just set it and forget it. Unlike portable ac units which are often wheeled around from room to room a window unit is designed to stay put. In spite of all of these benefits however window units have one major drawback: the noise. These units are loud and different models can range from being moderately annoying to downright deafening.
When purchasing a window air conditioner it is very important to purchase one with the proper cooling capacity. An air conditioner that is not properly sized will not work as efficiently as one that is sized properly. This is one of the most common mistakes made when selecting air conditioners. Use an air conditioner size calculator to select the proper sized unit for the room you want to cool. Undersized air conditioners will run continuously and not cool the space adequately and an oversized unit will cycle on and off too often. This increases equipment wear and can actually cause fuses to fail.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.