Window AC / September 5, 2018 / Lundy Brochu
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
If you already have a window air conditioning unit and you have noticed recently that it seems to be louder there are few steps you should take. Check to see if the unit is vibrating on the windowsill. It may need to be re-tightened on its shelf. The side panels might also be loose. Inspect those to see if they need tightening. If the unit seems to be vibrating more than normal consider sliding a piece of wood under the unit to secure it. For more tips about finding the best air conditioner check out these helpful guides: Your Guide to Finding Everstar Portable Air Conditioner Parts and Your Guide to Windowless AC Units.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.