Window AC / September 20, 2018 / Marphisa Babin.
A window air conditioner in my opinion is a last resort for air conditioning your house or building. There are many down sides to window air conditioning units. There are two good things that window air conditioners have going for them. They are very inexpensive when it comes to cost per BTU of cooling. They also install very quickly and easily. That is where the good part of them ends. Window air conditioners are security risks. If a thief wants to get into your house the thin sheet metal box that holds the unit in the window can easily be pulled apart to get in through the window.
Today window air conditioners are becoming less popular then wall split-systems. And it happens for several reasons. These air conditioning systems are indeed much noisier than split-systems and they significantly reduce the daylight area. But besides some disadvantages window air conditioners have decided advantages. The main advantage is reasonable price. Another important factor is easiness in installation and relatively small amount of Freon in the system. Modern device models provide intensive ventilation and air conditioning and are characterized by economical operation.
Equipped with remote control and electronic thermostat this is a very comfortable machine to operate and should handle bigger jobs perfectly. It is just another example of a highly rated GE window air conditioner. With so much competition in the manufacture and sale of conditioners there are certain models (we are not talking about cheap foreign manufactured models) which cost just a few hundred dollars. However better models cost more and provide better service. Even if you are aware of your requirement from an air conditioner there is always a dilemma as to which type of conditioner should a person choose.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.