Window AC / August 26, 2018 / Denise Brisette
Installing Your New Air Conditioner. Before you remove your new A/C from its packaging youll need to recruit a helper. Air conditioners are very hard to grip because their weight is uneven and dropping the unit from a window could be catastrophic. After you find a friend or family neighbor to help you can begin the installation by installing any mounting brackets that have been provided by the manufacturer. Heavy older units typically come with mounting brackets that help to support the A/C unit using the window sill and outer wall as balancing points. Next attach any extenders that come with your air conditioner.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.