Window AC / September 3, 2018 / Francoise Salmons
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Depending on the size and level of insulation of your home one window air conditioner is typically enough to cool one or two rooms but larger units may even be able to cool an entire 2-3 bedroom apartment. Using multiple cooling units in a home will allow each person in the family to keep their room at the temperature they desire. Installing a cooling unit will take anywhere from ten to forty minutes. Choosing the Right Air Conditioner
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.