Window AC / August 26, 2018 / Denise Brisette
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
These extenders will fill the space between the unit and the edges of to keep air from leaking out. Youre now ready to open the window from the bottom pain and have your helper raise the A/C into position. Rest the A/C on the window sill and slide the extensions out to fill any gaps. Check the instructions provided with your A/C for the what the correct placement is for your specific appliance. Most air conditioning units should tilt outward to drain any condensation that may accumulate on it. Finally you will fasten the brackets and lower the window pain back to the top of your machine. Sometimes it is wise to fasten the upper window pane in place to avoid movement of your A/C.
So what you should do? The best thing to do is to check out the sound levels on your window unit before you make your purchase. All air conditioners come with labels specifying the decibels generated by the unit. A high number means a loud machine. For example a unit with a rating of 50 Decibels is 10 times louder than one rated 40 Decibels. The smartest thing to do is to go to a big box store like Target or Walmart and listen to an air conditioner before you buy it. Even if you are looking at a different brand it is important to get a sense of how loud the Decibel ratings are for you. You can do this best by listening to different ac units running.