Window AC / September 3, 2018 / Francoise Salmons
When a small window unit for a large room is not enough a large unit for a small place is waste of money. So you should buy a window air conditioner appropriately based on your room space. For a space up to 350 square feet you would require 8000 BTUs. The number of BTUs grows proportionately according to your space. Window air conditioners have high-energy efficient ratios noise-free and when fitted properly cool an entire space very quickly. There are lots of types of window air conditioners from different companies available at different prices. Companies like Haier Kelon and Carrier have products starting from price ranges as low as $50-$150. They come with quiet operation function timer dehumidification air filters and much more.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
You can not block the air conditioner with curtains for example; otherwise the comfort will be created between the window and curtains but not in the room. Less effective in a larger room. Sometimes price is much the same as of the split-system. One must admit window air conditioners design more compact and reliable compared to split-system. Window air conditioning system consists of a single case. This so-called monoblock is mounted into the window opening or wall. The conditioner case is a big box assembled from metal plastic panels of white gray light brown or other pastel colors. All the filling of indoor and outdoor units of split-system (evaporator condenser compressor fan etc.) is inside the case. There are no any external connecting tubes.