Window AC / September 3, 2018 / Francoise Salmons
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Window air conditioners come in various sizes and it is important to choose the one that best fits the size of your room and needs of the user. The first thing to consider is to the rooms size. Using an climate control unit calculator or using the Energy Star chart for choosing a properly sized cooling appliance. For the average 150-250 square foot room youll need a climate control unit that has a capacity of 6000 BTUs. If you have rooms that flow into one another with archways or open doorways youll need to include the square footage of the adjoining room when calculating the capacity necessary to cool the area. Outside of square footage it is important to consider the climate of the room you wish to cool with an air conditioner.