Window AC / August 24, 2018 / Aubrette Dumoulin
They are also easy to install unlike split air systems and central ac. Installing a window unit is an easy DIY job that can be tackled in an hour or so. Also because they are installed in a semi-permanent fashion you just set it and forget it. Unlike portable ac units which are often wheeled around from room to room a window unit is designed to stay put. In spite of all of these benefits however window units have one major drawback: the noise. These units are loud and different models can range from being moderately annoying to downright deafening.
I have seen many units that are not even screwed fast. If the window air conditioner is just there balancing in the window frame it becomes very inviting for a unexpected guest. The window air conditioner is also very inefficient. These units use more power per BTU of cooling than any other type of air conditioner. If you are a light sleeper than chances are you will not want one of these window shakers. Window air conditioners are one of the loudest forms of air conditioning. The blower for these units is very loud when running. Then add the noise of the compressor and you have enough decibels to keep many people wide awake all night long.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.