Window AC / September 16, 2018 / Denise Brisette
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
If the room is shaded then you can decrease the BTU rating you calculated with the climate control unit calculator by 10 percent however if you wish to cool a kitchen youll need to raise the rating by 4000 BTUs. When the room you are cooling is used by two or more people add six hundred BTUs per person to the rating necessary to cool the room. Before you buy the first air conditioner that fits the BTU rating necessary to cool your room make sure you have a window that will be suitable for the unit. Measure windows in the room (make sure not to block fire escapes) and make sure to buy a window air conditioner that will fit into the opening.
When purchasing a window air conditioner it is very important to purchase one with the proper cooling capacity. An air conditioner that is not properly sized will not work as efficiently as one that is sized properly. This is one of the most common mistakes made when selecting air conditioners. Use an air conditioner size calculator to select the proper sized unit for the room you want to cool. Undersized air conditioners will run continuously and not cool the space adequately and an oversized unit will cycle on and off too often. This increases equipment wear and can actually cause fuses to fail.