Window AC / September 4, 2018 / Jacqueline Bizier
If you already have a window air conditioning unit and you have noticed recently that it seems to be louder there are few steps you should take. Check to see if the unit is vibrating on the windowsill. It may need to be re-tightened on its shelf. The side panels might also be loose. Inspect those to see if they need tightening. If the unit seems to be vibrating more than normal consider sliding a piece of wood under the unit to secure it. For more tips about finding the best air conditioner check out these helpful guides: Your Guide to Finding Everstar Portable Air Conditioner Parts and Your Guide to Windowless AC Units.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
This will help you determine the amount of BTU s necessary to cool your room adequately. For example an 8000 BTU unit will cool a room up to about 350 square feet. Another thing to consider when buying a window unit is any special features that come with the unit. In particular most window units include louvers that let you direct airflow programmable timers so that you can set the unit to turn off or on when you wish and energy efficient features like multiple fan speeds. Many units also come standard with a remote control so that you can adjust the temperature from across the room.