Window AC / September 4, 2018 / Jacqueline Bizier.
You can not block the air conditioner with curtains for example; otherwise the comfort will be created between the window and curtains but not in the room. Less effective in a larger room. Sometimes price is much the same as of the split-system. One must admit window air conditioners design more compact and reliable compared to split-system. Window air conditioning system consists of a single case. This so-called monoblock is mounted into the window opening or wall. The conditioner case is a big box assembled from metal plastic panels of white gray light brown or other pastel colors. All the filling of indoor and outdoor units of split-system (evaporator condenser compressor fan etc.) is inside the case. There are no any external connecting tubes.
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
When purchasing a window air conditioner it is very important to purchase one with the proper cooling capacity. An air conditioner that is not properly sized will not work as efficiently as one that is sized properly. This is one of the most common mistakes made when selecting air conditioners. Use an air conditioner size calculator to select the proper sized unit for the room you want to cool. Undersized air conditioners will run continuously and not cool the space adequately and an oversized unit will cycle on and off too often. This increases equipment wear and can actually cause fuses to fail.
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.