Window AC / August 24, 2018 / Aubrette Dumoulin
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
There are other bells and whistles that are available on units these days. These can include features like dehumidifiers to remove moisture from the air and antibacterial filters which can remove odors and bacteria. A final issue to consider if you are looking to buy window air conditioner is what sorts of energy saving features the unit might have. You may consider looking for a unit that has an Energy-Star rating. The EPA assigns an Energy-Star rating to air conditioners that meet certain standards for being cost-effective and guaranteeing energy savings. This can help keep your electricity bills and check even during the hottest days of summer.