Window AC / August 28, 2018 / Jacqueline Bizier
This will help you determine the amount of BTU s necessary to cool your room adequately. For example an 8000 BTU unit will cool a room up to about 350 square feet. Another thing to consider when buying a window unit is any special features that come with the unit. In particular most window units include louvers that let you direct airflow programmable timers so that you can set the unit to turn off or on when you wish and energy efficient features like multiple fan speeds. Many units also come standard with a remote control so that you can adjust the temperature from across the room.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
There are other bells and whistles that are available on units these days. These can include features like dehumidifiers to remove moisture from the air and antibacterial filters which can remove odors and bacteria. A final issue to consider if you are looking to buy window air conditioner is what sorts of energy saving features the unit might have. You may consider looking for a unit that has an Energy-Star rating. The EPA assigns an Energy-Star rating to air conditioners that meet certain standards for being cost-effective and guaranteeing energy savings. This can help keep your electricity bills and check even during the hottest days of summer.