Window AC / August 26, 2018 / Denise Brisette
Many people do not know how to set up a window air conditioner and therefore just allow their homes or offices to remain sweltering during the summer. Window air conditioners are great because they are the least invasive air conditioning systems to install and can very easily be turned off or removed as is needed. They are easy to put in and should come with descriptive directions and charts. However not all directions give little tips and tricks. The first thing you should do is make sure to install it during the day. Daylight will make it easier to see what you are doing so it does not fall out of the window and it will also keep bugs from entering while the window is open.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
You can not block the air conditioner with curtains for example; otherwise the comfort will be created between the window and curtains but not in the room. Less effective in a larger room. Sometimes price is much the same as of the split-system. One must admit window air conditioners design more compact and reliable compared to split-system. Window air conditioning system consists of a single case. This so-called monoblock is mounted into the window opening or wall. The conditioner case is a big box assembled from metal plastic panels of white gray light brown or other pastel colors. All the filling of indoor and outdoor units of split-system (evaporator condenser compressor fan etc.) is inside the case. There are no any external connecting tubes.