Window AC / August 29, 2018 / Lundy Brochu
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.