Window AC / August 26, 2018 / Denise Brisette
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
A window air conditioner is supposed to stay in place. This is different from a portable unit which rests on casters so that you can roll it from room to room. In most cases however a window unit will provide better cooling at a lower price that what a portable air conditioner can offer. Moreover you can install a window unit in each room if necessary. By many estimates having two or three window units is still cheaper than investing in a central system. When you are choosing a window air conditioner it is a smart idea to take measurements of the room you plan to cool.
When cooling such a device reduces the humidity in the room. There are certain advantages in it for example in a hot afternoon or after rain when the humidity reaches its maximum 100% and the dehumidification is up to 30-60% it facilitates thermoregulation of the body. Window air conditioners are able not only to cool the air. More expensive and modern models have remote control and can operate in the heating and cleaning mode. They have a wide range of operating temperatures - an average from 18 to 43°C. Powerful differently directed air flow evenly distributes across the area.