Window AC / August 26, 2018 / Denise Brisette
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
The main aspect in the choice of window air conditioner is its cool air performance. You can approximate the required power at the rate of 1 kW per 10 sq.m. with a ceiling height of 2.8 - 3 meters; for household models the characteristic is: from 1.5 - 2 to 6.5 - 8.5 kW. If there is a large glass area in the room windows face south or there are other additional heat inputs one should better buy a model with a power reserve of 15-20%. Another important factor in choosing window air conditioner is room functionality. For example air conditioner installed in the kitchen must be of high performance to provide optimal heat control. Air conditioning unit for bedrooms should have low noise characteristics.