Window AC / August 26, 2018 / Denise Brisette
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
If you already have a window air conditioning unit and you have noticed recently that it seems to be louder there are few steps you should take. Check to see if the unit is vibrating on the windowsill. It may need to be re-tightened on its shelf. The side panels might also be loose. Inspect those to see if they need tightening. If the unit seems to be vibrating more than normal consider sliding a piece of wood under the unit to secure it. For more tips about finding the best air conditioner check out these helpful guides: Your Guide to Finding Everstar Portable Air Conditioner Parts and Your Guide to Windowless AC Units.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.