Window AC / August 26, 2018 / Denise Brisette
The most commonly used air conditioners are window air conditioners. This is due mostly to the fact that they are the cheapest alternative when it comes to cooling our homes. But there are other reasons also. For example they install in a window out of the way. Install it and forget it. These units are also available with electric heat options. Window air conditioners were once so noisy that they were nicknamed window bangers. This term was very accurate and well deserved. However todays window air conditioners are very different from the ones many of us learned to hate.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
Installing Your New Air Conditioner. Before you remove your new A/C from its packaging youll need to recruit a helper. Air conditioners are very hard to grip because their weight is uneven and dropping the unit from a window could be catastrophic. After you find a friend or family neighbor to help you can begin the installation by installing any mounting brackets that have been provided by the manufacturer. Heavy older units typically come with mounting brackets that help to support the A/C unit using the window sill and outer wall as balancing points. Next attach any extenders that come with your air conditioner.