Window AC / September 17, 2018 / Francoise Salmons
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.
An additional benefit of a properly sized air conditioner is humidity control. While these units are operating moisture condenses on the evaporator coil just like a dehumidifier. Probably the most common problem with window air conditioners is that they sometimes develop rattling noises due to vibration. This is not a serious problem and can be rectified very easily by checking to make sure all screws are tight and check that the unit is mounted correctly in the window and not twisted or stressed. Air Conditioning is something that many people look at installing every year. There are many options when it comes time to make that decision.