Window AC / September 13, 2018 / Marphisa Babin
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
An additional benefit of a properly sized air conditioner is humidity control. While these units are operating moisture condenses on the evaporator coil just like a dehumidifier. Probably the most common problem with window air conditioners is that they sometimes develop rattling noises due to vibration. This is not a serious problem and can be rectified very easily by checking to make sure all screws are tight and check that the unit is mounted correctly in the window and not twisted or stressed. Air Conditioning is something that many people look at installing every year. There are many options when it comes time to make that decision.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.