Window AC / August 24, 2018 / Aubrette Dumoulin
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
Why are window air conditioners so loud? Well the reason is simple: because the entire air conditioner - the compressor the condenser and the fans - are all located in one single unit. By contrast with a split ac and a central air conditioner the compressor and condenser are installed outside of your home. That means that in those units the loudest parts arent in your home. With a window unit however the noisiest parts of the unit are inside your home. This can be a minor annoyance. It may mean that you have to turn up the volume on the tv to hear it. But it can also mean sleepless nights if your window air conditioner in your bedroom is deafening.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.