Window AC / August 24, 2018 / Aubrette Dumoulin
The most commonly used air conditioners are window air conditioners. This is due mostly to the fact that they are the cheapest alternative when it comes to cooling our homes. But there are other reasons also. For example they install in a window out of the way. Install it and forget it. These units are also available with electric heat options. Window air conditioners were once so noisy that they were nicknamed window bangers. This term was very accurate and well deserved. However todays window air conditioners are very different from the ones many of us learned to hate.
If you live in a college dorm studio apartment or a one-to-two bedroom apartment a window air conditioner is probably your best bet for keeping cool during the summer months. Unlike a central air conditioner a window unit can cost under $200 and will do an excellent job keeping your place cool during the dog days of summer. A window air conditioner - as the name suggests - sits on your window in a semi-permanent installation. This type of unit is designed to work straight out of the box and requires minimal hassle when installing to the window. Basically you attach the unit to your windowsill and then close the window down on top of it.
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.