Window AC / September 9, 2018 / Denise Brisette
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
Another huge improvement in window air conditioners is in their appearance. Older models did not blend in very well with their surroundings. They were usually some shade of brown and looked like there was a box in your window. Window air conditioners today are much less obtrusive and look less like boxes. Corners are rounded and colors are much lighter. This gives them a much sleeker look. As with most things once they have been around for awhile cost become more reasonable and less of an obstacle. A window air conditioner can be purchase for less than two hundred dollars and often not much more than one hundred dollars. Of course this is for smaller units. Costs go up as the cooling capacity of the unit increases.