Window AC / September 12, 2018 / Lundy Brochu
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Installing Your New Air Conditioner. Before you remove your new A/C from its packaging youll need to recruit a helper. Air conditioners are very hard to grip because their weight is uneven and dropping the unit from a window could be catastrophic. After you find a friend or family neighbor to help you can begin the installation by installing any mounting brackets that have been provided by the manufacturer. Heavy older units typically come with mounting brackets that help to support the A/C unit using the window sill and outer wall as balancing points. Next attach any extenders that come with your air conditioner.