Window AC / August 29, 2018 / Lundy Brochu
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
Slowly lessen your grip on it. If the conditioner wobbles the sash is not down tightly enough. After it is secured put in the foam provided around all cracks. You may have to use extra strips of paper towel to really make it tight. This will keep bugs from entering. Plug it in and turn it on. Looking for a GE Window Air Conditioner can be tough as youll soon see there are many General Electric products on the market. GE builds room ac units to accommodate the needs of every consumer whether you need to cool a small room or an entire home.