Window AC / August 27, 2018 / Francoise Salmons
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
Window air conditioners came to the market as a solution for people who couldnt afford or did not want central air conditioning. Because central air conditioning can be quite expensive and because many people live in small apartments central air is not for everyone. This led to the advent of window air conditioners. Window air conditioners have a hot coil and a chilled coil along with two fans. The fans blow air over these coils and they in turn suck away the heat and humidity from the room into the outside area providing clean cool air. The capacity of an air conditioner is measured in BTUs. So the size of the air conditioner plays a vital role in determining its cooling capacity.