Window AC / September 12, 2018 / Lundy Brochu
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
If you live in a college dorm studio apartment or a one-to-two bedroom apartment a window air conditioner is probably your best bet for keeping cool during the summer months. Unlike a central air conditioner a window unit can cost under $200 and will do an excellent job keeping your place cool during the dog days of summer. A window air conditioner - as the name suggests - sits on your window in a semi-permanent installation. This type of unit is designed to work straight out of the box and requires minimal hassle when installing to the window. Basically you attach the unit to your windowsill and then close the window down on top of it.
They are also easy to install unlike split air systems and central ac. Installing a window unit is an easy DIY job that can be tackled in an hour or so. Also because they are installed in a semi-permanent fashion you just set it and forget it. Unlike portable ac units which are often wheeled around from room to room a window unit is designed to stay put. In spite of all of these benefits however window units have one major drawback: the noise. These units are loud and different models can range from being moderately annoying to downright deafening.