Window AC / September 9, 2018 / Denise Brisette
When purchasing a window air conditioner it is very important to purchase one with the proper cooling capacity. An air conditioner that is not properly sized will not work as efficiently as one that is sized properly. This is one of the most common mistakes made when selecting air conditioners. Use an air conditioner size calculator to select the proper sized unit for the room you want to cool. Undersized air conditioners will run continuously and not cool the space adequately and an oversized unit will cycle on and off too often. This increases equipment wear and can actually cause fuses to fail.
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.