Window AC / September 10, 2018 / Francoise Salmons
Equipped with remote control and electronic thermostat this is a very comfortable machine to operate and should handle bigger jobs perfectly. It is just another example of a highly rated GE window air conditioner. With so much competition in the manufacture and sale of conditioners there are certain models (we are not talking about cheap foreign manufactured models) which cost just a few hundred dollars. However better models cost more and provide better service. Even if you are aware of your requirement from an air conditioner there is always a dilemma as to which type of conditioner should a person choose.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.