Window AC / September 6, 2018 / Marphisa Babin
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
When purchasing a window air conditioner it is very important to purchase one with the proper cooling capacity. An air conditioner that is not properly sized will not work as efficiently as one that is sized properly. This is one of the most common mistakes made when selecting air conditioners. Use an air conditioner size calculator to select the proper sized unit for the room you want to cool. Undersized air conditioners will run continuously and not cool the space adequately and an oversized unit will cycle on and off too often. This increases equipment wear and can actually cause fuses to fail.
Why are window air conditioners so loud? Well the reason is simple: because the entire air conditioner - the compressor the condenser and the fans - are all located in one single unit. By contrast with a split ac and a central air conditioner the compressor and condenser are installed outside of your home. That means that in those units the loudest parts arent in your home. With a window unit however the noisiest parts of the unit are inside your home. This can be a minor annoyance. It may mean that you have to turn up the volume on the tv to hear it. But it can also mean sleepless nights if your window air conditioner in your bedroom is deafening.