Window AC / September 6, 2018 / Marphisa Babin
Window air conditioners are the most common type of air conditioning units. It is also the most cost-effective solution of the microclimate problem though its the oldest one. One unit combines all the elements: compressor heat exchanger and fan. To choose the right window air conditioner to define the most appropriate type of device the manufacturer and consider all the requirements moreover to have the quality meeting the price you should consult a specialist.Though you can find the optimal solution by yourself having taken a rapid glance at your house.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.