Window AC / August 26, 2018 / Denise Brisette
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
Many people do not know how to set up a window air conditioner and therefore just allow their homes or offices to remain sweltering during the summer. Window air conditioners are great because they are the least invasive air conditioning systems to install and can very easily be turned off or removed as is needed. They are easy to put in and should come with descriptive directions and charts. However not all directions give little tips and tricks. The first thing you should do is make sure to install it during the day. Daylight will make it easier to see what you are doing so it does not fall out of the window and it will also keep bugs from entering while the window is open.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.