Window AC / August 24, 2018 / Aubrette Dumoulin
The main aspect in the choice of window air conditioner is its cool air performance. You can approximate the required power at the rate of 1 kW per 10 sq.m. with a ceiling height of 2.8 - 3 meters; for household models the characteristic is: from 1.5 - 2 to 6.5 - 8.5 kW. If there is a large glass area in the room windows face south or there are other additional heat inputs one should better buy a model with a power reserve of 15-20%. Another important factor in choosing window air conditioner is room functionality. For example air conditioner installed in the kitchen must be of high performance to provide optimal heat control. Air conditioning unit for bedrooms should have low noise characteristics.
I have seen many units that are not even screwed fast. If the window air conditioner is just there balancing in the window frame it becomes very inviting for a unexpected guest. The window air conditioner is also very inefficient. These units use more power per BTU of cooling than any other type of air conditioner. If you are a light sleeper than chances are you will not want one of these window shakers. Window air conditioners are one of the loudest forms of air conditioning. The blower for these units is very loud when running. Then add the noise of the compressor and you have enough decibels to keep many people wide awake all night long.
Another huge improvement in window air conditioners is in their appearance. Older models did not blend in very well with their surroundings. They were usually some shade of brown and looked like there was a box in your window. Window air conditioners today are much less obtrusive and look less like boxes. Corners are rounded and colors are much lighter. This gives them a much sleeker look. As with most things once they have been around for awhile cost become more reasonable and less of an obstacle. A window air conditioner can be purchase for less than two hundred dollars and often not much more than one hundred dollars. Of course this is for smaller units. Costs go up as the cooling capacity of the unit increases.