Window AC / September 13, 2018 / Marphisa Babin
These extenders will fill the space between the unit and the edges of to keep air from leaking out. Youre now ready to open the window from the bottom pain and have your helper raise the A/C into position. Rest the A/C on the window sill and slide the extensions out to fill any gaps. Check the instructions provided with your A/C for the what the correct placement is for your specific appliance. Most air conditioning units should tilt outward to drain any condensation that may accumulate on it. Finally you will fasten the brackets and lower the window pain back to the top of your machine. Sometimes it is wise to fasten the upper window pane in place to avoid movement of your A/C.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
If you live in a college dorm studio apartment or a one-to-two bedroom apartment a window air conditioner is probably your best bet for keeping cool during the summer months. Unlike a central air conditioner a window unit can cost under $200 and will do an excellent job keeping your place cool during the dog days of summer. A window air conditioner - as the name suggests - sits on your window in a semi-permanent installation. This type of unit is designed to work straight out of the box and requires minimal hassle when installing to the window. Basically you attach the unit to your windowsill and then close the window down on top of it.