Window AC / September 8, 2018 / Babette Arsenault
You can not block the air conditioner with curtains for example; otherwise the comfort will be created between the window and curtains but not in the room. Less effective in a larger room. Sometimes price is much the same as of the split-system. One must admit window air conditioners design more compact and reliable compared to split-system. Window air conditioning system consists of a single case. This so-called monoblock is mounted into the window opening or wall. The conditioner case is a big box assembled from metal plastic panels of white gray light brown or other pastel colors. All the filling of indoor and outdoor units of split-system (evaporator condenser compressor fan etc.) is inside the case. There are no any external connecting tubes.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Today window air conditioners are becoming less popular then wall split-systems. And it happens for several reasons. These air conditioning systems are indeed much noisier than split-systems and they significantly reduce the daylight area. But besides some disadvantages window air conditioners have decided advantages. The main advantage is reasonable price. Another important factor is easiness in installation and relatively small amount of Freon in the system. Modern device models provide intensive ventilation and air conditioning and are characterized by economical operation.