Window AC / September 18, 2018 / Jacqueline Bizier
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.