Window AC / August 30, 2018 / Marphisa Babin
If the room is shaded then you can decrease the BTU rating you calculated with the climate control unit calculator by 10 percent however if you wish to cool a kitchen youll need to raise the rating by 4000 BTUs. When the room you are cooling is used by two or more people add six hundred BTUs per person to the rating necessary to cool the room. Before you buy the first air conditioner that fits the BTU rating necessary to cool your room make sure you have a window that will be suitable for the unit. Measure windows in the room (make sure not to block fire escapes) and make sure to buy a window air conditioner that will fit into the opening.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.