Window AC / August 30, 2018 / Marphisa Babin
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.
The most commonly used air conditioners are window air conditioners. This is due mostly to the fact that they are the cheapest alternative when it comes to cooling our homes. But there are other reasons also. For example they install in a window out of the way. Install it and forget it. These units are also available with electric heat options. Window air conditioners were once so noisy that they were nicknamed window bangers. This term was very accurate and well deserved. However todays window air conditioners are very different from the ones many of us learned to hate.
They are also easy to install unlike split air systems and central ac. Installing a window unit is an easy DIY job that can be tackled in an hour or so. Also because they are installed in a semi-permanent fashion you just set it and forget it. Unlike portable ac units which are often wheeled around from room to room a window unit is designed to stay put. In spite of all of these benefits however window units have one major drawback: the noise. These units are loud and different models can range from being moderately annoying to downright deafening.