Window AC / August 1, 2018 / Denise Brisette.
To help make that decision more clear I will explore some of the positives and negatives of the two major options. Ductless split type units are also becoming more of an option. I will do another article on that option. To include that in this article would just be more confusing. So for now we will just look at window air conditioners and central air conditioning. Central air conditioning is the best way to go if you already have a central hot air heating system already installed in your house or building. The advantage that you have is that you already have the air handler or blower part already installed.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
When cooling such a device reduces the humidity in the room. There are certain advantages in it for example in a hot afternoon or after rain when the humidity reaches its maximum 100% and the dehumidification is up to 30-60% it facilitates thermoregulation of the body. Window air conditioners are able not only to cool the air. More expensive and modern models have remote control and can operate in the heating and cleaning mode. They have a wide range of operating temperatures - an average from 18 to 43°C. Powerful differently directed air flow evenly distributes across the area.
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.