Window AC / September 8, 2018 / Babette Arsenault.
Depending on the size and level of insulation of your home one window air conditioner is typically enough to cool one or two rooms but larger units may even be able to cool an entire 2-3 bedroom apartment. Using multiple cooling units in a home will allow each person in the family to keep their room at the temperature they desire. Installing a cooling unit will take anywhere from ten to forty minutes. Choosing the Right Air Conditioner
So what you should do? The best thing to do is to check out the sound levels on your window unit before you make your purchase. All air conditioners come with labels specifying the decibels generated by the unit. A high number means a loud machine. For example a unit with a rating of 50 Decibels is 10 times louder than one rated 40 Decibels. The smartest thing to do is to go to a big box store like Target or Walmart and listen to an air conditioner before you buy it. Even if you are looking at a different brand it is important to get a sense of how loud the Decibel ratings are for you. You can do this best by listening to different ac units running.
The most commonly used air conditioners are window air conditioners. This is due mostly to the fact that they are the cheapest alternative when it comes to cooling our homes. But there are other reasons also. For example they install in a window out of the way. Install it and forget it. These units are also available with electric heat options. Window air conditioners were once so noisy that they were nicknamed window bangers. This term was very accurate and well deserved. However todays window air conditioners are very different from the ones many of us learned to hate.
The answer is It depends on the wall thickness. Sleeve specifications for some window air conditioner manufacturers include the maximum wall thickness before it will cover part of the louvers. For example Amanas 18000 BTU models have a max of 8.5 inches. If the wall thickness is at or below that these models can be used in as a wall air conditioner without adversely affecting function. So whats the problem if the wall covers a little of the louvers? Two things: 1) restriction of air movement and therefore reduced efficiency and 2) these units pull air in very powerfully. Cut wall edges could become loose allowing material to be sucked into the unit and potentially causing damage.