Window AC / September 19, 2018 / Lundy Brochu.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
When a small window unit for a large room is not enough a large unit for a small place is waste of money. So you should buy a window air conditioner appropriately based on your room space. For a space up to 350 square feet you would require 8000 BTUs. The number of BTUs grows proportionately according to your space. Window air conditioners have high-energy efficient ratios noise-free and when fitted properly cool an entire space very quickly. There are lots of types of window air conditioners from different companies available at different prices. Companies like Haier Kelon and Carrier have products starting from price ranges as low as $50-$150. They come with quiet operation function timer dehumidification air filters and much more.
Depending on the size and level of insulation of your home one window air conditioner is typically enough to cool one or two rooms but larger units may even be able to cool an entire 2-3 bedroom apartment. Using multiple cooling units in a home will allow each person in the family to keep their room at the temperature they desire. Installing a cooling unit will take anywhere from ten to forty minutes. Choosing the Right Air Conditioner
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.