Window AC / August 31, 2018 / Aubrette Dumoulin.
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
The Advantages of window air conditioning units: They are cheap. Compact. Sometimes provide partial ventilation. No installation required. Easy transportation from place to place. Suitable for apartments summer cottages and offices. Window air conditioner can be easily installed in a shop on wheels. Another important advantage is long lifetime: window air conditioners seldom get to a service center mostly after many years of usage (the simpler the system - the more reliable it is). The disadvantages: High noise level. They block a part of the window stealing the daylight. The window frame must be altered.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.