Window AC / September 21, 2018 / Aubrette Dumoulin
One sees a similar box for a wall air conditioner. Naturally people assume they are the same. But they arent and this article will explain why. The two types share some characteristics. Both span the dividing line from inside to outside allowing all components to be housed in a single box. Therefore both utilize both inside and outside air to perform. Both are designed to condition a single room. But there are differences. Windows are thin and the sleeve for a window unit is designed to take advantage of this. It sits on the window sill with the window closed onto the case to seal the top.
An additional benefit of a properly sized air conditioner is humidity control. While these units are operating moisture condenses on the evaporator coil just like a dehumidifier. Probably the most common problem with window air conditioners is that they sometimes develop rattling noises due to vibration. This is not a serious problem and can be rectified very easily by checking to make sure all screws are tight and check that the unit is mounted correctly in the window and not twisted or stressed. Air Conditioning is something that many people look at installing every year. There are many options when it comes time to make that decision.
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.